On Wed, Aug 16, 2017 at 01:45:13PM +0200, Maxime Bellengé wrote:
> Asus ROG G752xx laptops have hardware buttons. Currently only the left
> button works if a finger touches the pad which is not very convenient.
> 
> I couldn't find a clear pattern based on ic type and product id to
> determine if the device has hardware buttons or if it is a clickpad as
> it is vendor dependant. So I chose to base the patch on dmi as I
> couldn't find any other laptop based on elan i2c and having hardware
> buttons.
> 

KT, any feedback here?

> Signed-off-by: Maxime Bellengé <[email protected]>
> ---
>  drivers/input/mouse/elan_i2c_core.c | 40 
> ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/mouse/elan_i2c_core.c 
> b/drivers/input/mouse/elan_i2c_core.c
> index 3b616cb7c67f..fa417105898f 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -37,6 +37,7 @@
>  #include <linux/of.h>
>  #include <linux/regulator/consumer.h>
>  #include <asm/unaligned.h>
> +#include <linux/dmi.h>
>  
>  #include "elan_i2c.h"
>  
> @@ -923,6 +924,7 @@ static void elan_report_absolute(struct elan_tp_data 
> *data, u8 *packet)
>       }
>  
>       input_report_key(input, BTN_LEFT, tp_info & 0x01);
> +        input_report_key(input, BTN_RIGHT, tp_info & 0x02);
>       input_report_abs(input, ABS_DISTANCE, hover_event != 0);
>       input_mt_report_pointer_emulation(input, true);
>       input_sync(input);
> @@ -960,6 +962,39 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
>  }
>  
>  /*
> + * Asus ROG G752xx have hardware buttons
> + */
> + static const struct dmi_system_id elan_dmi_has_hw_buttons[] = {
> + #if defined(CONFIG_DMI) && defined(CONFIG_X86)
> +     {
> +             .matches = {
> +                     DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +                     DMI_MATCH(DMI_PRODUCT_NAME, "G752VT"),
> +             },
> +     },
> +     {
> +             .matches = {
> +                     DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +                     DMI_MATCH(DMI_PRODUCT_NAME, "G752VS"),
> +             },
> +     },
> +        {
> +             .matches = {
> +                     DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +                     DMI_MATCH(DMI_PRODUCT_NAME, "G752VY"),
> +             },
> +     },
> +        {
> +             .matches = {
> +                     DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
> +                     DMI_MATCH(DMI_PRODUCT_NAME, "G752VL"),
> +             },
> +     },
> + #endif
> +     { }
> + };
> +
> +/*
>   ******************************************************************
>   * Elan initialization functions
>   ******************************************************************
> @@ -991,7 +1026,10 @@ static int elan_setup_input_device(struct elan_tp_data 
> *data)
>  
>       __set_bit(EV_ABS, input->evbit);
>       __set_bit(INPUT_PROP_POINTER, input->propbit);
> -     __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
> +        if (dmi_check_system(elan_dmi_has_hw_buttons)) {
> +                __set_bit(BTN_RIGHT, input->keybit);
> +        } else
> +            __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
>       __set_bit(BTN_LEFT, input->keybit);
>  
>       /* Set up ST parameters */
> -- 
> 2.13.5
> 

-- 
Dmitry

Reply via email to