在 2017-08-19 17:11,Chen-Yu Tsai 写道:
On Tue, Aug 15, 2017 at 4:52 PM, <icen...@aosc.io> wrote:
在 2017-08-15 13:55,Icenowy Zheng 写道:
Allwinner R40 SoC have a clock controller module in the style of the
SoCs beyond sun6i, however, it's more rich and complex.
Add support for it.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
Changes in v5:
- Added TODO's for PLL constraints.
- Forced OHCI12M mux to 0.
- Changed "adda" clock to "codec" to be consistent with "bus-codec".
- Added several CLK_SET_RATE_{UNGATE,PARENT} flags.
- Added PLL_CPU gate notifier.
Changes in v4:
- Removed usb-ohci-12M mux clocks.
- Removed unused (and not in user manual) adda-4x clock.
- Implemented proper SATA PLL system.
- Renamed MP (Mixed Processor) clock names to drop the extra "DE_".
- Renamed TCONs' clock names to "tcon-lcdX" or "tcon-tvX".
- Added missing RST_DRAM.
- Several clock post/pre-dividers and constraints fixes.
Changes in v3:
- Rebased on current linux-next.
Changes in v2:
- Fixes according to the SoC's user manual.
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 1290
+++++++++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun8i-r40.h | 69 ++
include/dt-bindings/clock/sun8i-r40-ccu.h | 187 +++++
include/dt-bindings/reset/sun8i-r40-ccu.h | 130 +++
6 files changed, 1682 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-r40.h
create mode 100644 include/dt-bindings/clock/sun8i-r40-ccu.h
create mode 100644 include/dt-bindings/reset/sun8i-r40-ccu.h
[...]
+static void __init sun8i_r40_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0,
of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN8I_R40_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN8I_R40_PLL_AUDIO_REG);
+
+ /* Force PLL-MIPI to MIPI mode */
+ val = readl(reg + SUN8I_R40_PLL_MIPI_REG);
+ val &= ~BIT(16);
+ writel(val, reg + SUN8I_R40_PLL_MIPI_REG);
+
+ /* Force OHCI 12M parent to 0 */
Clarified the comment as
Force OHCI 12M parent to 12M divided from 48M
+ val = readl(reg + SUN8I_R40_USB_CLK_REG);
+ val &= ~GENMASK(20, 6);
Sorry but I think this line should be:
val &= ~GENMASK(25, 20);
I didn't understand GENMASK well...
Fixed and applied. Thanks!
Thanks!
ChenYu