On Apr 25, 2007, at 5:46 PM, Andrew Morton wrote:
On Tue, 24 Apr 2007 14:02:03 +0400 Evgeniy Polyakov <[EMAIL PROTECTED]> wrote:+#define DS1WM_CMD_1W_RESET 1 << 0 /* force reset on 1-wire bus */+#define DS1WM_CMD_SRA 1 << 1 /* enable Search ROM accelerator mode */+#define DS1WM_CMD_DQ_OUTPUT 1 << 2 /* write only - forces bus low */+#define DS1WM_CMD_DQ_INPUT 1 << 3 /* read only - reflects state of bus */+ +#define DS1WM_INT_PD 1 << 0 /* presence detect */ +#define DS1WM_INT_PDR 1 << 1 /* presence detect result */ +#define DS1WM_INT_TBE 1 << 2 /* tx buffer empty */ +#define DS1WM_INT_TSRE 1 << 3 /* tx shift register empty */ +#define DS1WM_INT_RBF 1 << 4 /* rx buffer full */ +#define DS1WM_INT_RSRF 1 << 5 /* rx shift register full */ + +#define DS1WM_INTEN_EPD 1 << 0 /* enable presence detect int */ +#define DS1WM_INTEN_IAS 1 << 1 /* INTR active state */ +#define DS1WM_INTEN_ETBE 1 << 2 /* enable tx buffer empty int */+#define DS1WM_INTEN_ETMT 1 << 3 /* enable tx shift register empty int */+#define DS1WM_INTEN_ERBF 1 << 4 /* enable rx buffer full int */+#define DS1WM_INTEN_ERSRF 1 << 5 /* enable rx shift register full int */+#define DS1WM_INTEN_DQO 1 << 6 /* enable direct bus driving ops + (undocumented), Szabolcs Gyurko */These macros are very dangerous - please parenthesise them all.
(and several other helpful suggestions...)Thanks for your review Andrew. I made all the code changes you suggested in the attached patch.
Matt
0001-w1-driver-for-Maxim-DS1WM.patch
Description: Binary data
