Re: [PATCH 1/2] ARM: dts: Add the CLCD controller to Cygnus.

[Scott Branden]

Hi Eric,

mode is correct, location in file needs to be moved.


On 17-08-31 11:54 AM, Eric Anholt wrote:

This doesn't yet enable it on any particular platform, as we still
need a panel driver for bcm911360_entphn.

Signed-off-by: Eric Anholt <e...@anholt.net>
---

These bits are just carving off a little bit of my 911360_entphn panel
series, to reduce conflicts when rebasing (which I just did for
testing pl111 changes for cygnus regressions).  I'm waiting to get my
current RPi panel driver in before working on the 911360 panel again.

  arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++
  1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi 
b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 7c957ea06c66..74f73ff24aec 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -575,6 +575,16 @@
                        status = "disabled";
                };

+ clcd: clcd@180a0000 {

please place in correct address ordered location in file

+                       compatible = "arm,pl111", "arm,primecell";
+                       reg = <0x180a0000 0x1000>;
+                       interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "combined";
+                       clocks = <&axi41_clk>, <&apb_clk>;
+                       clock-names = "clcdclk", "apb_pclk";
+                       status = "disabled";
+               };
+
                keypad: keypad@180ac000 {
                        compatible = "brcm,bcm-keypad";
                        reg = <0x180ac000 0x14c>;