On Wed, Aug 30, 2017 at 05:01:10AM +0200, Philipp Rossak wrote: > From: Philipp Rossak <[email protected]> > > The BT side of the AP6212 WiFi/BT combo module is connected to > uart3. > > Enable BT on this board by enabling uart3 with using additionally > the cts and rts pins. > > Signed-off-by: Philipp Rossak <[email protected]>
I've queued this patch for 4.15, but...
> ---
> arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 3054308..8c12419 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -49,6 +49,7 @@
> aliases {
> ethernet0 = &emac;
> ethernet1 = &ap6212;
> + serial1 = &uart3;
You'll also need an alias for serial 0 here. Can you send a follow up
patch to do so?
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
