[PATCH 8/9] ARM: dts: TQma53: move network phy reset GPIO where it belongs to

[Juergen Borleis]

Signal has an external pullup and works with weakest settings (driver
strength and speed).

Signed-off-by: Juergen Borleis <j...@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 7 +++++++
 arch/arm/boot/dts/imx53-tqma53.dtsi | 1 -
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts 
b/arch/arm/boot/dts/imx53-mba53.dts
index 5b9e9af14aa6c..fb50ed8cc8f47 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -139,6 +139,12 @@
                                MX53_PAD_EIM_DA15__IPU_DI1_PIN4    0xe6
                        >;
                };
+
+               pinctrl_fec_reset: fecreset-grp {
+                       fsl,pins = <
+                               MX53_PAD_PATA_DA_0__GPIO7_6     0x00000000
+                       >;
+               };
        };
 };
 
@@ -180,6 +186,7 @@
 };
 
 &fec {
+       pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_reset>;
        phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
        status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi 
b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 1c5cd103ed841..1ab5fbab1d728 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -78,7 +78,6 @@
                                 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* 
CSI_PWDN */
                                 MX53_PAD_GPIO_19__GPIO4_5       0x80000000 /* 
#SYSTEM_DOWN */
                                 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-                                MX53_PAD_PATA_DA_0__GPIO7_6     0x80000000 /* 
#PHY_RESET */
                                 MX53_PAD_GPIO_1__PWM2_PWMO      0x80000000 /* 
LCD_CONTRAST */
                        >;
                };
-- 
2.11.0