The referenced 3.3 V regulator is a 3.2 V regulator and part of the 'TQma53'
CPU card instead of the development 'mba53' baseboard. So fix the voltage
and move it to where it belongs to.

Signed-off-by: Juergen Borleis <j...@pengutronix.de>
---
 arch/arm/boot/dts/imx53-mba53.dts   | 10 +---------
 arch/arm/boot/dts/imx53-tqma53.dtsi | 14 +++++++-------
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-mba53.dts 
b/arch/arm/boot/dts/imx53-mba53.dts
index 69733c8473d2b..5b9e9af14aa6c 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -52,14 +52,6 @@
                startup-delay-us = <5000>;
        };
 
-       reg_3p2v: base3p2v {
-               compatible = "regulator-fixed";
-               regulator-name = "3P2V";
-               regulator-min-microvolt = <3200000>;
-               regulator-max-microvolt = <3200000>;
-               regulator-always-on;
-       };
-
        sound {
                compatible = "tq,imx53-mba53-sgtl5000",
                             "fsl,imx-audio-sgtl5000";
@@ -193,7 +185,7 @@
 };
 
 &esdhc2 {
-       vmmc-supply = <&reg_3p3v>;
+       vmmc-supply = <&reg_3p2v>;
        status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi 
b/arch/arm/boot/dts/imx53-tqma53.dtsi
index fa5d712bd47b8..02eb3f4b605de 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -20,11 +20,11 @@
                reg = <0x70000000 0x40000000>; /* Up to 1GiB */
        };
 
-       reg_3p3v: card3p3v {
+       reg_3p2v: card3p2v {
                compatible = "regulator-fixed";
-               regulator-name = "3P3V";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
+               regulator-name = "3P2V";
+               regulator-min-microvolt = <3200000>;
+               regulator-max-microvolt = <3200000>;
                regulator-always-on;
        };
 };
@@ -33,7 +33,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc2>,
                    <&pinctrl_esdhc2_cdwp>;
-       vqmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_3p2v>;
        wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
        cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
        status = "disabled";
@@ -56,8 +56,8 @@
 &esdhc3 { /* EMMC */
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_esdhc3>;
-       vmmc-supply = <&reg_3p3v>;
-       vqmmc-supply = <&reg_3p3v>;
+       vmmc-supply = <&reg_3p2v>;
+       vqmmc-supply = <&reg_3p2v>;
        non-removable;
        bus-width = <8>;
        status = "okay";
-- 
2.11.0

Reply via email to