This patch is required to create an uImage which
boot on Hitachi edosk2674 into a shell. (tested with sash)
The patch was tested with 4.4/4.9 LTS kernel. It seems >4.13
contains a regression, which does not allow to boot Linux on
the device anymore.

Signed-off-by: Waldemar Brodkorb <w...@openadk.org>
---
 arch/h8300/Kconfig.cpu                 | 4 ++++
 arch/h8300/configs/edosk2674_defconfig | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/h8300/Kconfig.cpu b/arch/h8300/Kconfig.cpu
index 8d0ff20c749a..1d2ccd1ad556 100644
--- a/arch/h8300/Kconfig.cpu
+++ b/arch/h8300/Kconfig.cpu
@@ -96,4 +96,8 @@ config OFFSET
         hex "Load offset"
        default 0
 
+config RAMBASE
+       hex "RAM base address"
+       default 0x400000
+
 endmenu
diff --git a/arch/h8300/configs/edosk2674_defconfig 
b/arch/h8300/configs/edosk2674_defconfig
index 29fda12d5da9..0cc040040292 100644
--- a/arch/h8300/configs/edosk2674_defconfig
+++ b/arch/h8300/configs/edosk2674_defconfig
@@ -18,7 +18,7 @@ CONFIG_EMBEDDED=y
 CONFIG_SLOB=y
 # CONFIG_BLOCK is not set
 CONFIG_H8S_SIM=y
-CONFIG_H8300_BUILTIN_DTB="h8s_sim"
+CONFIG_H8300_BUILTIN_DTB="edosk2674"
 # CONFIG_BINFMT_SCRIPT is not set
 CONFIG_BINFMT_FLAT=y
 # CONFIG_COREDUMP is not set
-- 
2.11.0

Reply via email to