Set all sys wake polarities to active high during initial setup. The default is active low, which currently causes the 'flow_type' passed into the set_type function to be effectively inverted.
Signed-off-by: Ed Blake <[email protected]> --- drivers/irqchip/irq-imgpdc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-imgpdc.c b/drivers/irqchip/irq-imgpdc.c index 22d8f8a..d1bcfef 100644 --- a/drivers/irqchip/irq-imgpdc.c +++ b/drivers/irqchip/irq-imgpdc.c @@ -49,6 +49,8 @@ #define PDC_IRQ_ROUTE_EXT_EN_WD 0x00000004 #define PDC_IRQ_ROUTE_EXT_EN_IR 0x00000002 #define PDC_IRQ_ROUTE_EXT_EN_RTC 0x00000001 +#define PDC_SYS_WAKE_POL 0x00000020 +#define PDC_SYS_WAKE_POL_SHIFT 5 #define PDC_SYS_WAKE_RESET 0x00000010 #define PDC_SYS_WAKE_INT_MODE 0x0000000e #define PDC_SYS_WAKE_INT_MODE_SHIFT 1 @@ -63,6 +65,9 @@ #define PDC_SYS_WAKE_INT_CHANGE 0x6 #define PDC_SYS_WAKE_INT_NONE 0x4 +#define PDC_SYS_WAKE_ACTIVE_LOW 0x0 +#define PDC_SYS_WAKE_ACTIVE_HIGH 0x1 + /** * struct pdc_intc_priv - private pdc interrupt data. * @nr_perips: Number of peripheral interrupt signals. @@ -335,8 +340,9 @@ static void pdc_intc_setup(struct pdc_intc_priv *priv) for (i = 0; i < priv->nr_syswakes; ++i) { /* set the IRQ mode to none */ soc_sys_wake_regoff = PDC_SYS_WAKE_BASE + i*PDC_SYS_WAKE_STRIDE; - soc_sys_wake = PDC_SYS_WAKE_INT_NONE - << PDC_SYS_WAKE_INT_MODE_SHIFT; + soc_sys_wake = + PDC_SYS_WAKE_ACTIVE_HIGH << PDC_SYS_WAKE_POL_SHIFT | + PDC_SYS_WAKE_INT_NONE << PDC_SYS_WAKE_INT_MODE_SHIFT; pdc_write(priv, soc_sys_wake_regoff, soc_sys_wake); } } -- 1.9.1
