Some node names in the A80 DTSI still have underscores in them. Remove them
in favour of hyphens to remove DTC warnings.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f9cb701f29b0..70d79ef711b3 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -139,7 +139,7 @@
* would also throw all the PLL clock rates off, or just the
* downstream clocks in the PRCM.
*/
- osc24M: osc24M_clk {
+ osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -151,7 +151,7 @@
* AC100 codec/RTC chip. This serves as a placeholder for
* board dts files to specify the source.
*/
- osc32k: osc32k_clk {
+ osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
@@ -169,7 +169,7 @@
clock-output-names = "cpus";
};
- ahbs: ahbs_clk {
+ ahbs: ahbs-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
clock-div = <1>;
@@ -708,12 +708,12 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
- r_ir_pins: r_ir {
+ r_ir_pins: r-ir {
pins = "PL6";
function = "s_cir_rx";
};
- r_rsb_pins: r_rsb {
+ r_rsb_pins: r-rsb {
pins = "PN0", "PN1";
function = "s_rsb";
drive-strength = <20>;
--
git-series 0.9.1
