[PATCH 18/20] ARM: dts: sun9i: cubieboard4: Remove card detect pull-up

[Maxime Ripard]

The board has an external pull-up on the card-detect signal, so there's no
need to add another one.

This also removes a DTC warning.

Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts 
b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 15cc82350360..cb337e08adab 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -85,7 +85,7 @@
 
 &mmc0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+       pinctrl-0 = <&mmc0_pins>;
        vmmc-supply = <&reg_dcdc1>;
        bus-width = <4>;
        cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
@@ -128,14 +128,6 @@
        clocks = <&ac100_rtc 0>;
 };
 
-&pio {
-       mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
-               pins = "PH18";
-               function = "gpio_in";
-               bias-pull-up;
-       };
-};
-
 &r_ir {
        status = "okay";
 };
-- 
git-series 0.9.1