[PATCH 11/15] ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0

[Claudiu Beznea]

Add pin muxing for pwm0 and set it as disabled since it is in conflict
with pins for leds.

Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts 
b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e04db7b74714..82777747cc72 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -231,7 +231,9 @@
                        };
 
                        pwm0: pwm@f802c000 {
-                               status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+                               status = "disabled"; /* conflict with leds */
                        };
 
                        flx0: flexcom@f8034000 {
@@ -501,6 +503,11 @@
                                        bias-disable;
                                };
 
+                               pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+                                       pinmux = <PIN_PB5__PWMH2>,
+                                                <PIN_PB6__PWML2>;
+                                       bias-pull-up;
+                               };
                        };
 
                        classd: classd@fc048000 {
@@ -537,7 +544,7 @@
                compatible = "gpio-leds";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_led_gpio_default>;
-               status = "okay";
+               status = "okay"; /* conflict with pwm0 */
 
                red {
                        label = "red";
-- 
2.7.4