[PATCH 06/15] ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0

[Claudiu Beznea]

Add pin muxing for pwm0 and set it as disabled since it is in conflict
with the pins for leds.

Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts 
b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 6c4c976a99d1..339f4e71cf40 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -136,7 +136,9 @@
                        };
 
                        pwm0: pwm@f802c000 {
-                               status = "okay";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_mikrobus1_pwm 
&pinctrl_mikrobus2_pwm>;
+                               status = "disabled"; /* Conflict with leds. */
                        };
 
                        flx1: flexcom@f8038000 {
@@ -529,7 +531,7 @@
                compatible = "gpio-leds";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_led_gpio_default>;
-               status = "okay";
+               status = "okay"; /* Conflict with pwm0. */
 
                red {
                        label = "red";
-- 
2.7.4