[PATCH v2 12/14] ARM: dts: at91: at91sam9x25ek: add CAN1 interface

[Claudiu Beznea]

From: Nicolas Ferre <nicolas.fe...@microchip.com>

As the CAN1 interface is not multiplexed with other peripherals on this
board, enable it so that it can be tested more easily.

Signed-off-by: Nicolas Ferre <nicolas.fe...@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
 arch/arm/boot/dts/at91sam9x25ek.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts 
b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..f8360fb23107 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -16,6 +16,10 @@
 
        ahb {
                apb {
+                       can1: can@f8004000 {
+                               status = "okay";
+                       };
+
                        macb0: ethernet@f802c000 {
                                phy-mode = "rmii";
                                status = "okay";
-- 
2.7.4