Rob Herring <r...@kernel.org> wrote on Tue [2017-Oct-17 16:00:51 -0500]:
> On Thu, Oct 12, 2017 at 02:27:17PM -0500, Benoit Parrot wrote:
> > Device Tree bindings for the Video Processing Engine (VPE) driver.
> >
> > Signed-off-by: Benoit Parrot <bpar...@ti.com>
> > ---
> > Documentation/devicetree/bindings/media/ti-vpe.txt | 41
> > ++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt
> >
> > diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt
> > b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > new file mode 100644
> > index 000000000000..c2ef93d08417
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > @@ -0,0 +1,41 @@
> > +Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
> > +------------------------------------------------------
> > +
> > +The Video Processing Engine (VPE) is a key component for image post
> > +processing applications. VPE consist of a single memory to memory
> > +path which can perform chroma up/down sampling, deinterlacing,
> > +scaling and color space conversion.
> > +
> > +Required properties:
> > +- compatible: must be "ti,vpe"
>
> Needs SoC specific compatibles.
This particular I/P is present on all DRA7x family of devices
so would "ti,dra7-vpe" be acceptable?
>
> > +- reg: physical base address and length of the registers set for the 8
> > + memory regions required;
> > +- reg-names: name associated with the memory regions described is <reg>;
> > +- interrupts: should contain IRQ line for VPE;
> > +
> > +Example:
> > + vpe {
> > + compatible = "ti,vpe";
> > + ti,hwmods = "vpe";
> > + clocks = <&dpll_core_h23x2_ck>;
> > + clock-names = "fck";
> > + reg = <0x489d0000 0x120>,
> > + <0x489d0300 0x20>,
> > + <0x489d0400 0x20>,
> > + <0x489d0500 0x20>,
> > + <0x489d0600 0x3c>,
> > + <0x489d0700 0x80>,
>
> Is there other stuff between these regions?
No, they listed separately because each sub-region/module is
individually mapped and accessed using a starting 0 offset.
>
> > + <0x489d5700 0x18>,
> > + <0x489dd000 0x400>;
> > + reg-names = "vpe_top",
> > + "vpe_chr_us0",
> > + "vpe_chr_us1",
> > + "vpe_chr_us2",
> > + "vpe_dei",
> > + "sc",
> > + "csc",
> > + "vpdma";
> > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> These aren't needed.
OK, I'll remove those.
Benoit
>
> > + };
> > --
> > 2.9.0
> >
