On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888 LCD0 pins. Add lcd_rgb888_pins in sun7i-a20.dtsi.
It can be used on sun7i-a20-olinuxino-lime.dts. This patch gives possibility to set parallel lcd pins for RGB888. To be used with tcon0 in your <target>.dts Best regards Giulio Benetti Micronova srl Signed-off-by: Giulio Benetti <[email protected]> --- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 228c368..b85a917 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -921,6 +921,14 @@ pins = "PI20", "PI21"; function = "uart7"; }; + + lcd_rgb888_pins: lcd-rgb888 { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; }; timer@1c20c00 { -- 2.7.4
