Hi

On Friday, December 01, 2017 10:54 AM, Brian Norris wrote:
One more comment:

On Thu, Nov 30, 2017 at 02:14:40PM +0800, Lin Huang wrote:
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.

Signed-off-by: Lin Huang <h...@rock-chips.com>

---
  drivers/gpu/drm/panel/panel-innolux-p079zca.c | 178 ++++++++++++++++++++------
  1 file changed, 136 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c 
b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index 6ba9344..a40798f 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
...

@@ -209,20 +284,39 @@ static const struct drm_panel_funcs innolux_panel_funcs = 
{
  };
static const struct of_device_id innolux_of_match[] = {
-       { .compatible = "innolux,p079zca", },
-       { }
+       { .compatible = "innolux,p079zca",
+         .data = &innolux_p079zca_panel_desc
+       },
+       { .compatible = "innolux,p097pfg",
+         .data = &innolux_p097pfg_panel_desc
+       }
  };
  MODULE_DEVICE_TABLE(of, innolux_of_match);
-static int innolux_panel_add(struct innolux_panel *innolux)
+static int innolux_panel_add(struct mipi_dsi_device *dsi,
+                            const struct panel_desc_dsi *desc)
  {
-       struct device *dev = &innolux->link->dev;
+       struct innolux_panel *innolux;
+       struct device *dev = &dsi->dev;
        struct device_node *np;
        int err;
- innolux->supply = devm_regulator_get(dev, "power");
-       if (IS_ERR(innolux->supply))
-               return PTR_ERR(innolux->supply);
+       innolux = devm_kzalloc(dev, sizeof(*innolux), GFP_KERNEL);
+       if (!innolux)
+               return -ENOMEM;
+
+       innolux->dsi_desc = desc;
+       innolux->vddi = devm_regulator_get_optional(dev, "power");
+       if (IS_ERR(innolux->vddi))
+               return PTR_ERR(innolux->vddi);
+
+       innolux->avdd = devm_regulator_get(dev, "ppvarp");
This name ("ppvarp" and the "ppvarn" below) are names from our board
schematics, not from the panel datasheet. I would think these should be
"vdd" and "vee", like your variable names.
Okay, will fix it next version.

Brian

+       if (IS_ERR(innolux->avdd))
+               return PTR_ERR(innolux->avdd);
+
+       innolux->avee = devm_regulator_get(dev, "ppvarn");
+       if (IS_ERR(innolux->avee))
+               return PTR_ERR(innolux->avee);
innolux->enable_gpio = devm_gpiod_get_optional(dev, "enable",
                                                       GPIOD_OUT_HIGH);
...





Reply via email to