Modify the properties of usb wakeup, and use the new way of mtu_wakeup
which is extracted from SSUSB controller dirver as a new driver.
Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
---
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index b2271d8..2ed546d 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -42,9 +42,17 @@ Optional properties:
- enable-manual-drd : supports manual dual-role switch via debugfs; usually
used when receptacle is TYPE-A and also wants to support dual-role
mode.
- - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode
- - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
- control register, it depends on "mediatek,enable-wakeup".
+ - mediatek,uwks : a phandle to USB-Wakeup node to control the type of wakeup,
+ it's used to replace the old way which is realized by the property of
+ "mediatek,wakeup-wakeup" and "mediatek,syscon-wakeup",
+ see: Documentation/devicetree/bindings/soc/mediatek/usb-wakeup.txt
+ - wakeup-source : Decides if the new way of USB wakeup is supported or
+ not, it depends on "mediatek,uwks" property.
+ - mediatek,enable-wakeup : (deprecated) supports ip sleep wakeup used by
+ host mode, only supports mt8173 platform, use the property of
+ "mediatek,uwks" instead on other SoCs.
+ - mediatek,syscon-wakeup : (deprecated) phandle to syscon used to access
+ USB wakeup control register, it depends on "mediatek,enable-wakeup".
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
--
1.9.1
