On Thu, Dec 14, 2017 at 05:34:00PM +0000, srinivas.kandaga...@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
>
> Add devicetree bindings documentation file for Qualcomm apq8096 sound card.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
> ---
> .../devicetree/bindings/sound/qcom,apq8096.txt | 22
> ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
> b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
> new file mode 100644
> index 000000000000..27b511dab533
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
> @@ -0,0 +1,22 @@
> +* Qualcomm Technologies APQ8096 ASoC sound card driver
> +
> +This binding describes the APQ8096 sound card, which uses qdsp for audio.
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: must be "qcom,apq8096-sndcard"
> +
> +- qcom,audio-routing:
> + Usage: Optional
> + Value type: <stringlist>
> + Definition: A list of the connections between audio components.
> + Each entry is a pair of strings, the first being the
> + connection's sink, the second being the connection's
> + source. Valid names could be power supplies, MicBias
> + of codec and the jacks on the board:
> +Example:
> + sound {
> + compatible = "qcom,snd-apq8096";
> + qcom,model = "DB820c";
Not documented, but just use "model".
This doesn't look complete. No codec, etc.?
Rob
