On 2017-12-14 at 17:53:59 +0100, Mathieu Malaterre <ma...@debian.org> wrote:
> Improve the DTS files by removing all the leading "0x" and zeros to fix the
> following dtc warnings:
>
> Warning (unit_address_format): Node /XXX unit name should not have leading
> "0x"
>
> and
>
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s
>
> Converted using the following command:
>
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e
> "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1
> \{/g" {} +
>
> For simplicity, two sed expressions were used to solve each warnings
> separately.
>
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
>
> https://elinux.org/Device_Tree_Linux#Linux_conventions
>
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x
> from bindings notation")
>
> Reported-by: David Daney <dda...@caviumnetworks.com>
> Suggested-by: Rob Herring <r...@kernel.org>
> Signed-off-by: Mathieu Malaterre <ma...@debian.org>
Reviewed-by: Tobias Klauser <tklau...@distanz.ch>
This file was originally generated by sopc2dts [1], so it'll probably
need updating as well (Cc'ing Walter).
[1] https://github.com/wgoossens/sopc2dts
> ---
> arch/nios2/boot/dts/3c120_devboard.dts | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/nios2/boot/dts/3c120_devboard.dts
> b/arch/nios2/boot/dts/3c120_devboard.dts
> index 36ccdf05837d..56f4b5df6d65 100644
> --- a/arch/nios2/boot/dts/3c120_devboard.dts
> +++ b/arch/nios2/boot/dts/3c120_devboard.dts
> @@ -29,7 +29,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> - cpu: cpu@0x0 {
> + cpu: cpu@0 {
> device_type = "cpu";
> compatible = "altr,nios2-1.0";
> reg = <0x00000000>;
> @@ -69,7 +69,7 @@
> compatible = "altr,avalon", "simple-bus";
> bus-frequency = <125000000>;
>
> - pb_cpu_to_io: bridge@0x8000000 {
> + pb_cpu_to_io: bridge@8000000 {
> compatible = "simple-bus";
> reg = <0x08000000 0x00800000>;
> #address-cells = <1>;
> @@ -83,7 +83,7 @@
> <0x00008000 0x08008000 0x00000020>,
> <0x00400000 0x08400000 0x00000020>;
>
> - timer_1ms: timer@0x400000 {
> + timer_1ms: timer@400000 {
> compatible = "altr,timer-1.0";
> reg = <0x00400000 0x00000020>;
> interrupt-parent = <&cpu>;
> @@ -91,7 +91,7 @@
> clock-frequency = <125000000>;
> };
>
> - timer_0: timer@0x8000 {
> + timer_0: timer@8000 {
> compatible = "altr,timer-1.0";
> reg = < 0x00008000 0x00000020 >;
> interrupt-parent = < &cpu >;
> @@ -99,14 +99,14 @@
> clock-frequency = < 125000000 >;
> };
>
> - jtag_uart: serial@0x4d50 {
> + jtag_uart: serial@4d50 {
> compatible = "altr,juart-1.0";
> reg = <0x00004d50 0x00000008>;
> interrupt-parent = <&cpu>;
> interrupts = <1>;
> };
>
> - tse_mac: ethernet@0x4000 {
> + tse_mac: ethernet@4000 {
> compatible = "altr,tse-1.0";
> reg = <0x00004000 0x00000400>,
> <0x00004400 0x00000040>,
> @@ -133,7 +133,7 @@
> };
> };
>
> - uart: serial@0x4c80 {
> + uart: serial@4c80 {
> compatible = "altr,uart-1.0";
> reg = <0x00004c80 0x00000020>;
> interrupt-parent = <&cpu>;
> @@ -143,7 +143,7 @@
> };
> };
>
> - cfi_flash_64m: flash@0x0 {
> + cfi_flash_64m: flash@0 {
> compatible = "cfi-flash";
> reg = <0x00000000 0x04000000>;
> bank-width = <2>;
> --
> 2.11.0
>
