On Wed, Dec 20, 2017 at 12:35:38PM +0100, Javier Martinez Canillas wrote:
> Commit 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems")
> added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN
> signal during TPM transactions.
>
> Unfortunately this breaks other devices that are attached to the LPC bus
> like for example PS/2 mouse and keyboards.
>
> One flaw with the logic is that it assumes that the CLKRUN is always
> enabled, and so it unconditionally enables it after a TPM transaction.
>
> But it could be that the CLKRUN# signal was already disabled in the LPC
> bus and so after the driver probes, CLKRUN_EN will remain enabled which
> may break other devices that are attached to the LPC bus but don't have
> support for the CLKRUN protocol.
>
> Fixes: 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems")
> Signed-off-by: Javier Martinez Canillas <javi...@redhat.com>
> Tested-by: James Ettle <ja...@ettle.org.uk>
>
> ---
>
> This patch fixes the bug reported for the Fedora kernel [0] and the kernel
> bugzilla [1]. The issue and the propossed solution were discussed in this
> [2] thread.
>
> [0]: https://bugzilla.redhat.com/show_bug.cgi?id=1498987
> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=197287
> [2]: https://patchwork.kernel.org/patch/10119417/
>
>
> drivers/char/tpm/tpm_tis.c | 2 +-
> drivers/char/tpm/tpm_tis_core.c | 13 +++++++++++--
> 2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index d0ad9a89b02b..c79193f6d092 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -314,7 +314,7 @@ static int tpm_tis_plat_remove(struct platform_device
> *pdev)
> tpm_chip_unregister(chip);
> tpm_tis_remove(chip);
>
> - if (is_bsw())
> + if (is_bsw() && priv->ilb_base_addr)
> iounmap(priv->ilb_base_addr);
>
> return 0;
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 534cd46fdfae..17fb9c600d0e 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -742,7 +742,8 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip,
> bool value)
> struct tpm_tis_data *data = dev_get_drvdata(&chip->dev);
> u32 clkrun_val;
>
> - if (!IS_ENABLED(CONFIG_X86) || !is_bsw())
> + if (!IS_ENABLED(CONFIG_X86) || !is_bsw() ||
> + !data->ilb_base_addr)
> return;
>
> if (value) {
> @@ -801,6 +802,7 @@ int tpm_tis_core_init(struct device *dev, struct
> tpm_tis_data *priv, int irq,
> u32 vendor;
> u32 intfcaps;
> u32 intmask;
> + u32 clkrun_val;
> u8 rid;
> int rc, probe;
> struct tpm_chip *chip;
> @@ -826,6 +828,13 @@ int tpm_tis_core_init(struct device *dev, struct
> tpm_tis_data *priv, int irq,
> ILB_REMAP_SIZE);
> if (!priv->ilb_base_addr)
> return -ENOMEM;
> +
> + clkrun_val = ioread32(priv->ilb_base_addr + LPC_CNTRL_OFFSET);
> + /* Check if CLKRUN# is already not enabled in the LPC bus */
> + if (!(clkrun_val & LPC_CLKRUN_EN)) {
> + iounmap(priv->ilb_base_addr);
> + priv->ilb_base_addr = NULL;
> + }
> }
>
> if (chip->ops->clk_enable != NULL)
> @@ -935,7 +944,7 @@ int tpm_tis_core_init(struct device *dev, struct
> tpm_tis_data *priv, int irq,
> if (chip->ops->clk_enable != NULL)
> chip->ops->clk_enable(chip, false);
>
> - if (is_bsw())
> + if (is_bsw() && priv->ilb_base_addr)
> iounmap(priv->ilb_base_addr);
>
> return rc;
> --
> 2.14.3
>
Reviewed-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
/Jarkko
