Thanks for the comments,
On 03/01/18 00:22, Bjorn Andersson wrote:
On Thu 14 Dec 09:34 PST 2017, srinivas.kandaga...@linaro.org wrote:
From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
This patch adds hdmi sound card support to db820c via qdsp.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 5 +++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 ++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 9769053957af..b955769b100d 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -190,6 +190,11 @@
};
};
+ snd {
+ compatible = "qcom,apq8096-sndcard";
+ qcom,model = "DB820c";
+ iommus = <&lpass_q6_smmu 1>;
+ };
gpio_keys {
compatible = "gpio-keys";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a144cec7bb71..25c43fb8ab49 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1262,6 +1262,7 @@
phys = <&hdmi_phy>;
phy-names = "hdmi_phy";
+ #sound-dai-cells = <0>;
ports {
#address-cells = <1>;
@@ -1297,6 +1298,33 @@
"ref_clk";
};
};
+
+ lpass_q6_smmu: arm,smmu-lpass_q6@1600000 {
name this node "iommu"
will rename it to arm,smmu@1600000
+ compatible = "qcom,msm8996-smmu-v2";
+ reg = <0x1600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
Indentation
sure.
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
+ status = "okay";
+ };
};
adsp-pil {
@@ -1325,6 +1353,11 @@
qcom,ipc = <&apcs 16 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
+
+ apr {
"apr-audio-svc", as this is not the only apr channel on this edge.
yep.
+ compatible = "qcom,apr-msm8996";
+ qcom,smd-channels = "apr_audio_svc";
+ };
};
Regards,
Bjorn
