Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.

This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.

Suggested-by: Brian Norris <briannor...@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.c...@rock-chips.com>
---

Changes in v2:
Specify wakeup event action instead of irq trigger type as Brian
suggested.

 drivers/input/keyboard/gpio_keys.c     | 27 +++++++++++++++++++++++++++
 include/linux/gpio_keys.h              |  2 ++
 include/uapi/linux/input-event-codes.h |  9 +++++++++
 3 files changed, 38 insertions(+)

diff --git a/drivers/input/keyboard/gpio_keys.c 
b/drivers/input/keyboard/gpio_keys.c
index 87e613dc33b8..5c57339d3999 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -45,6 +45,8 @@ struct gpio_button_data {
        unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */
 
        unsigned int irq;
+       unsigned int irq_trigger_type;
+       unsigned int wakeup_trigger_type;
        spinlock_t lock;
        bool disabled;
        bool key_pressed;
@@ -540,6 +542,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
        }
 
        if (bdata->gpiod) {
+               int active_low = gpiod_is_active_low(bdata->gpiod);
+
                if (button->debounce_interval) {
                        error = gpiod_set_debounce(bdata->gpiod,
                                        button->debounce_interval * 1000);
@@ -568,6 +572,16 @@ static int gpio_keys_setup_key(struct platform_device 
*pdev,
                isr = gpio_keys_gpio_isr;
                irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
 
+               switch (button->wakeup_event_action) {
+               case EV_ACT_ASSERTED:
+                       bdata->wakeup_trigger_type = active_low ?
+                               IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+                       break;
+               case EV_ACT_DEASSERTED:
+                       bdata->wakeup_trigger_type = active_low ?
+                               IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+                       break;
+               }
        } else {
                if (!button->irq) {
                        dev_err(dev, "Found button without gpio or irq\n");
@@ -618,6 +632,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
                return error;
        }
 
+       bdata->irq_trigger_type = irq_get_trigger_type(bdata->irq);
+
        return 0;
 }
 
@@ -718,6 +734,9 @@ gpio_keys_get_devtree_pdata(struct device *dev)
                        /* legacy name */
                        fwnode_property_read_bool(child, "gpio-key,wakeup");
 
+               fwnode_property_read_u32(child, "wakeup-event-action",
+                                        &button->wakeup_event_action);
+
                button->can_disable =
                        fwnode_property_read_bool(child, "linux,can-disable");
 
@@ -854,6 +873,10 @@ static int __maybe_unused gpio_keys_suspend(struct device 
*dev)
        if (device_may_wakeup(dev)) {
                for (i = 0; i < ddata->pdata->nbuttons; i++) {
                        struct gpio_button_data *bdata = &ddata->data[i];
+
+                       if (bdata->button->wakeup && bdata->wakeup_trigger_type)
+                               irq_set_irq_type(bdata->irq,
+                                                bdata->wakeup_trigger_type);
                        if (bdata->button->wakeup)
                                enable_irq_wake(bdata->irq);
                        bdata->suspended = true;
@@ -878,6 +901,10 @@ static int __maybe_unused gpio_keys_resume(struct device 
*dev)
        if (device_may_wakeup(dev)) {
                for (i = 0; i < ddata->pdata->nbuttons; i++) {
                        struct gpio_button_data *bdata = &ddata->data[i];
+
+                       if (bdata->button->wakeup && bdata->wakeup_trigger_type)
+                               irq_set_irq_type(bdata->irq,
+                                                bdata->irq_trigger_type);
                        if (bdata->button->wakeup)
                                disable_irq_wake(bdata->irq);
                        bdata->suspended = false;
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index d06bf77400f1..7160df54a6fe 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -13,6 +13,7 @@ struct device;
  * @desc:              label that will be attached to button's gpio
  * @type:              input event type (%EV_KEY, %EV_SW, %EV_ABS)
  * @wakeup:            configure the button as a wake-up source
+ * @wakeup_event_action:       event action to trigger wakeup
  * @debounce_interval: debounce ticks interval in msecs
  * @can_disable:       %true indicates that userspace is allowed to
  *                     disable button via sysfs
@@ -26,6 +27,7 @@ struct gpio_keys_button {
        const char *desc;
        unsigned int type;
        int wakeup;
+       int wakeup_event_action;
        int debounce_interval;
        bool can_disable;
        int value;
diff --git a/include/uapi/linux/input-event-codes.h 
b/include/uapi/linux/input-event-codes.h
index 53fbae27b280..d7917b0bd438 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -32,6 +32,15 @@
 #define INPUT_PROP_CNT                 (INPUT_PROP_MAX + 1)
 
 /*
+ * Event action types
+ */
+#define EV_ACT_ANY                     0x00    /* asserted or deasserted */
+#define EV_ACT_ASSERTED                        0x01    /* asserted */
+#define EV_ACT_DEASSERTED              0x02    /* deasserted */
+#define EV_ACT_MAX                     0x02
+#define EV_ACT_CNT                     (EV_ACT_MAX+1)
+
+/*
  * Event types
  */
 
-- 
2.11.0


Reply via email to