On Sat, May 19, 2007 at 09:04:56PM +0200, Tejun Heo wrote: > Tejun Heo wrote: > > Yeah, if SCR registers are accessible, 0xff doesn't indicate the device > > isn't there, so the whole skip-0xff logic probably shouldn't apply in > > such cases, but we can also achieve pretty good result by just making > > the first reset tries a bit more aggressive. > > So, here's the patch. > > Paul, can you please test this patch without the previous patch? Indan, > this should reduce the resume delay. Please test. But you'll still > feel some added delay compared to 2.6.20 due to the mentioned > suspend/resume change. > Seems to work ok:
[ 0.977254] scsi0 : sata_sil [ 0.980243] scsi1 : sata_sil [ 0.983207] ata1: SATA max UDMA/100 cmd 0xfd000280 ctl 0xfd00028a bmdma 0xfd000200 irq 0 [ 0.991183] ata2: SATA max UDMA/100 cmd 0xfd0002c0 ctl 0xfd0002ca bmdma 0xfd000208 irq 0 [ 2.578436] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.586828] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080 [ 2.591596] ata1.00: ATA-5: HHD424020F7SV00, 00MLA0A5, max UDMA/100 [ 2.598094] ata1.00: 39070080 sectors, multi 0: LBA [ 2.603248] ata1.00: applying bridge limits [ 2.614710] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080 [ 2.619489] ata1.00: configured for UDMA/100 [ 2.933096] ata2: SATA link down (SStatus 0 SControl 310) [ 2.936265] scsi 0:0:0:0: Direct-Access ATA HHD424020F7SV00 00ML PQ: 0 ANSI: 5 [ 2.945002] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB) [ 2.951473] sd 0:0:0:0: [sda] Write Protect is off - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
