Adds device nodes for two front panel LEDs.

Signed-off-by: Tomasz Maciej Nowak <tmn...@gmail.com>
---
 arch/arm/boot/dts/tegra20-trimslice.dts | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts 
b/arch/arm/boot/dts/tegra20-trimslice.dts
index d55c6b240a30..31a8b088d386 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -200,16 +200,17 @@
                        conf_ata {
                                nvidia,pins = "ata", "atc", "atd", "ate",
                                        "crtp", "dap2", "dap3", "dap4", "dta",
-                                       "dtb", "dtc", "dtd", "dte", "gmb",
-                                       "gme", "i2cp", "pta", "slxc", "slxd",
-                                       "spdi", "spdo", "uda";
+                                       "dtb", "dtc", "dtd", "gmb", "gme",
+                                       "i2cp", "pta", "slxc", "slxd", "spdi",
+                                       "spdo", "uda";
                                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
                                nvidia,tristate = <TEGRA_PIN_ENABLE>;
                        };
                        conf_atb {
                                nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-                                       "gma", "gmc", "gmd", "gpu", "gpu7",
-                                       "gpv", "sdio1", "slxa", "slxk", "uac";
+                                       "dte", "gma", "gmc", "gmd", "gpu",
+                                       "gpu7", "gpv", "sdio1", "slxa", "slxk",
+                                       "uac";
                                nvidia,pull = <TEGRA_PIN_PULL_NONE>;
                                nvidia,tristate = <TEGRA_PIN_DISABLE>;
                        };
@@ -402,6 +403,20 @@
                };
        };
 
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               ds2 {
+                       label = "trimslice:green:right";
+                       gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
+               };
+
+               ds3 {
+                       label = "trimslice:green:left";
+                       gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
+               };
+       };
+
        poweroff {
                compatible = "gpio-poweroff";
                gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-- 
2.16.2

Reply via email to