On 02/20/2018 06:12 PM, Jacopo Mondi wrote:
> Populate the ethernet@e6800000 device node to enable Ethernet interface
> for R-Car M3-N (r8a77965) SoC.
>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
>
> ---
> v1 -> v2:
> - Replace ALWAYS_ON power area identifier with numeric constant
> ---
> arch/arm64/boot/dts/renesas/r8a77965.dtsi | 43
> ++++++++++++++++++++++++++++++-
> 1 file changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> index 55f05f7..c249895 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> @@ -520,7 +520,48 @@
> };
>
> avb: ethernet@e6800000 {
> - /* placeholder */
> + compatible = "renesas,etheravb-r8a77965",
> + "renesas,etheravb-rcar-gen3";
> + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
> + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "ch0", "ch1", "ch2", "ch3",
> + "ch4", "ch5", "ch6", "ch7",
> + "ch8", "ch9", "ch10", "ch11",
> + "ch12", "ch13", "ch14", "ch15",
> + "ch16", "ch17", "ch18", "ch19",
> + "ch20", "ch21", "ch22", "ch23",
> + "ch24";
> + clocks = <&cpg CPG_MOD 812>;
> + power-domains = <&sysc 32>;
> + resets = <&cpg 812>;
> + phy-mode = "rgmii-txid";
Why not just "rgmii"? TX delay is a board specific detail, no?
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> };
>
> csi20: csi2@fea80000 {
>
MBR, Sergei
