From: Srinivas Kandagatla <[email protected]> XO is onchip buffer clock to generate 19.2MHz.
This patch adds support to 5 XO buffer clocks found on PMIC8921, these buffer clocks can be controlled from external pin or in manual mode. Signed-off-by: Srinivas Kandagatla <[email protected]> --- drivers/clk/qcom/clk-rpm.c | 39 +++++++++++++++++++++++++++++++++- include/dt-bindings/clock/qcom,rpmcc.h | 5 +++++ 2 files changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c index c60f61b10c7f..261f5505e714 100644 --- a/drivers/clk/qcom/clk-rpm.c +++ b/drivers/clk/qcom/clk-rpm.c @@ -29,6 +29,7 @@ #define QCOM_RPM_MISC_CLK_TYPE 0x306b6c63 #define QCOM_RPM_SCALING_ENABLE_ID 0x2 +#define QCOM_RPM_XO_MODE_ON 0x2 #define DEFINE_CLK_RPM(_platform, _name, _active, r_id) \ static struct clk_rpm _platform##_##_active; \ @@ -56,6 +57,19 @@ }, \ } +#define DEFINE_CLK_RPM_XO_BUFFER(_platform, _name, _active, offset) \ + static struct clk_rpm _platform##_##_name = { \ + .rpm_clk_id = QCOM_RPM_CXO_BUFFERS, \ + .xo_offset = (offset), \ + .rate = 19200000, \ + .hw.init = &(struct clk_init_data){ \ + .ops = &clk_rpm_fixed_ops, \ + .name = #_name, \ + .parent_names = (const char *[]){ "pxo_board" }, \ + .num_parents = 1, \ + }, \ + } + #define DEFINE_CLK_RPM_FIXED(_platform, _name, _active, r_id, r) \ static struct clk_rpm _platform##_##_name = { \ .rpm_clk_id = (r_id), \ @@ -128,6 +142,8 @@ struct clk_rpm { const int rpm_clk_id; + const int xo_offset; + u32 xo_buffer_value; const bool active_only; unsigned long rate; bool enabled; @@ -159,7 +175,8 @@ static int clk_rpm_handoff(struct clk_rpm *r) * The vendor tree simply reads the status for this * RPM clock. */ - if (r->rpm_clk_id == QCOM_RPM_PLL_4) + if (r->rpm_clk_id == QCOM_RPM_PLL_4 || + r->rpm_clk_id == QCOM_RPM_CXO_BUFFERS) return 0; ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, @@ -294,6 +311,11 @@ static int clk_rpm_fixed_prepare(struct clk_hw *hw) u32 value = 1; int ret; + if (r->rpm_clk_id == QCOM_RPM_CXO_BUFFERS) { + r->xo_buffer_value |= (QCOM_RPM_XO_MODE_ON << r->xo_offset); + value = r->xo_buffer_value; + } + ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, r->rpm_clk_id, &value, 1); if (!ret) @@ -308,6 +330,11 @@ static void clk_rpm_fixed_unprepare(struct clk_hw *hw) u32 value = 0; int ret; + if (r->rpm_clk_id == QCOM_RPM_CXO_BUFFERS) { + r->xo_buffer_value &= ~(QCOM_RPM_XO_MODE_ON << r->xo_offset); + value = r->xo_buffer_value; + } + ret = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, r->rpm_clk_id, &value, 1); if (!ret) @@ -449,6 +476,11 @@ DEFINE_CLK_RPM(apq8064, mmfpb_clk, mmfpb_a_clk, QCOM_RPM_MMFPB_CLK); DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK); +DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d0_clk, xo_d0_a_clk, 0); +DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_d1_clk, xo_d1_a_clk, 8); +DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a0_clk, xo_a0_a_clk, 16); +DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a1_clk, xo_a1_a_clk, 24); +DEFINE_CLK_RPM_XO_BUFFER(apq8064, xo_a2_clk, xo_a2_a_clk, 28); static struct clk_rpm *apq8064_clks[] = { [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk, @@ -469,6 +501,11 @@ static struct clk_rpm *apq8064_clks[] = { [RPM_SFPB_A_CLK] = &apq8064_sfpb_a_clk, [RPM_QDSS_CLK] = &apq8064_qdss_clk, [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk, + [RPM_XO_D0] = &apq8064_xo_d0_clk, + [RPM_XO_D1] = &apq8064_xo_d1_clk, + [RPM_XO_A0] = &apq8064_xo_a0_clk, + [RPM_XO_A1] = &apq8064_xo_a1_clk, + [RPM_XO_A2] = &apq8064_xo_a2_clk, }; static const struct rpm_clk_desc rpm_clk_apq8064 = { diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h index b8337a5fa347..c585b82b9c05 100644 --- a/include/dt-bindings/clock/qcom,rpmcc.h +++ b/include/dt-bindings/clock/qcom,rpmcc.h @@ -40,6 +40,11 @@ #define RPM_SMI_CLK 22 #define RPM_SMI_A_CLK 23 #define RPM_PLL4_CLK 24 +#define RPM_XO_D0 25 +#define RPM_XO_D1 26 +#define RPM_XO_A0 27 +#define RPM_XO_A1 28 +#define RPM_XO_A2 29 /* SMD RPM clocks */ #define RPM_SMD_XO_CLK_SRC 0 -- 2.16.2
