>From the hardware perspective, the actual pclk of the AO uarts is the corresponding clkc_ao uart gate, not the main clock controller clk81. This was not problem so far, because the uart_gate had the CLK_IGNORE_UNUSED flag, which kept the gate open.
We plan to remove the CLK_IGNORE_UNUSED flag in another patch, but before doing that, we need to fix the clock in the DTS file. Signed-off-by: Yixun Lan <[email protected]> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 40ca49fb94a6..dc6ca0895f11 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -798,7 +798,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -807,7 +807,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 562c26a0ba33..ea6898f62044 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -749,12 +749,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index e1a39cbed8c9..472106ce9a75 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -697,12 +697,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; -- 2.15.1
