[PATCH] ARM: dts: imx53-ppd: Use IRQ_TYPE_* constants

[Sebastian Reichel]

Replace magic numbers with IRQ_TYPE_* constants to improve
DT readability.

Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.co.uk>
---
 arch/arm/boot/dts/imx53-ppd.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index d5628af2e301..d02d07470ad3 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -300,7 +300,7 @@
                compatible = "dlg,da9053-aa";
                reg = <0>;
                interrupt-parent = <&gpio3>;
-               interrupts = <12 0x8>;
+               interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
                spi-max-frequency = <1000000>;
                dlg,tsi-as-adc;
                tsiref-supply = <&reg_tsiref>;
@@ -473,7 +473,7 @@
                                compatible = "fsl,mma8453";
                                reg = <0x1c>;
                                interrupt-parent = <&gpio1>;
-                               interrupts = <6 0>;
+                               interrupts = <6 IRQ_TYPE_NONE>;
                                interrupt-names = "INT1";
                        };
 
@@ -539,7 +539,7 @@
                reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
                reg = <0x4b>;
                interrupt-parent = <&gpio5>;
-               interrupts = <4 0x8>;
+               interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
        };
 };
 
-- 
2.17.0