Hi, Fabio Anson Huang Best Regards!
> -----Original Message----- > From: Fabio Estevam [mailto:[email protected]] > Sent: Thursday, April 26, 2018 5:46 AM > To: Anson Huang <[email protected]> > Cc: Shawn Guo <[email protected]>; Sascha Hauer > <[email protected]>; Fabio Estevam <[email protected]>; Rob > Herring <[email protected]>; Mark Rutland <[email protected]>; > Russell King - ARM Linux <[email protected]>; dl-linux-imx > <[email protected]>; moderated list:ARM/FREESCALE IMX / MXC ARM > ARCHITECTURE <[email protected]>; open list:OPEN > FIRMWARE AND FLATTENED DEVICE TREE BINDINGS > <[email protected]>; linux-kernel <[email protected]> > Subject: Re: [PATCH V4 3/6] ARM: dts: imx6sx-sabreauto: add IO expander > max7310 support > > On Wed, Apr 25, 2018 at 2:36 AM, Anson Huang <[email protected]> > wrote: > > > +&i2c3 { > > + clock-frequency = <100000>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3_2>; > > + status = "okay"; > > + > > + max7310_a: gpio@30 { > > + compatible = "maxim,max7310"; > > + reg = <0x30>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > + > > + max7310_b: gpio@32 { > > + compatible = "maxim,max7310"; > > + reg = <0x32>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + }; > > Please also add the users for the MAX7310 pins, such as Ethernet PHY. MAX7310 pins are for PCIe, CAN, MLB. GPS etc., these modules are NOT enabled yet, so I can NOT test it, I think we should add MAX7310 users when these modules are enabled, ethernet PHY is NOT controlled by it. Anson.
