Hi Sibi,
On Wed, 2018-04-25 at 20:38 +0530, Sibi Sankar wrote:
> Add SDM845 AOSS (always on subsystem) reset controller binding
>
> Signed-off-by: Sibi Sankar <si...@codeaurora.org>
> ---
> .../bindings/reset/qcom,aoss-reset.txt | 52 +++++++++++++++++++
> include/dt-bindings/reset/qcom,sdm845-aoss.h | 17 ++++++
> 2 files changed, 69 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
> create mode 100644 include/dt-bindings/reset/qcom,sdm845-aoss.h
>
> diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
> b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
> new file mode 100644
> index 000000000000..e5201de9a314
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
> @@ -0,0 +1,52 @@
> +Qualcomm AOSS Reset Controller
> +======================================
> +
> +This binding describes a reset-controller found on AOSS (always on subsystem)
> +for Qualcomm SDM845 SoCs.
> +
> +Required properties:
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be:
> + "qcom,sdm845-aoss-reset"
> +
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: must specify the base address and size of the register
> + space.
> +
> +- #reset-cells:
> + Usage: required
> + Value type: <uint>
> + Definition: must be 1; cell entry represents the reset index.
> +
> +Example:
> +
> +aoss_reset: qcom,reset-controller@b2e0100 {
The node name should be "reset-controller", not "qcom,reset-controller"
> + compatible = "qcom,sdm845-aoss-reset";
> + reg = <0xc2b0000 0x21000>;
The address here should match the address part of the node name above.
Apart from those two nitpicks, the binding looks good to me.
regards
Philipp
