Quoting Akshu Agrawal (2018-05-03 01:30:26)
> diff --git a/drivers/clk/x86/Makefile b/drivers/clk/x86/Makefile
> index 1367afb..2aee002 100644
> --- a/drivers/clk/x86/Makefile
> +++ b/drivers/clk/x86/Makefile
> @@ -1,3 +1,4 @@
> clk-x86-lpss-objs := clk-lpt.o
> obj-$(CONFIG_X86_INTEL_LPSS) += clk-x86-lpss.o
> obj-$(CONFIG_PMC_ATOM) += clk-pmc-atom.o
> +obj-$(CONFIG_X86_AMD_PLATFORM_DEVICE) += clk-st.o
Ok. Can you sort this by kconfig? Or by file name?
> diff --git a/drivers/clk/x86/clk-st.c b/drivers/clk/x86/clk-st.c
> new file mode 100644
> index 0000000..d8c283c
> --- /dev/null
> +++ b/drivers/clk/x86/clk-st.c
> @@ -0,0 +1,86 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * clock framework for AMD Stoney based clocks
> + *
> + * Copyright 2018 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
One point of SPDX is to avoid this boiler plate multi-line license
comments. Can you remove this and just leave the AMD copyright part?
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/platform_data/clk-st.h>
> +#include <linux/platform_device.h>
> +
> +/* Clock Driving Strength 2 register */
> +#define CLKDRVSTR2 0x28
> +/* Clock Control 1 register */
> +#define MISCCLKCNTL1 0x40
> +/* Auxiliary clock1 enable bit */
> +#define OSCCLKENB 2
> +/* 25Mhz auxiliary output clock freq bit */
> +#define OSCOUT1CLK25MHZ 16
> +
> +#define ST_CLK_48M 0
> +#define ST_CLK_25M 1
> +#define ST_CLK_MUX 2
> +#define ST_CLK_GATE 3
> +#define ST_MAX_CLKS 4
> +
> +static const char * const clk_oscout1_parents[] = { "clk48MHz", "clk25MHz" };
> +
> +static int st_clk_probe(struct platform_device *pdev)
> +{
> + struct st_clk_data *st_data;
> + struct clk_hw **hws;
> +
> + st_data = dev_get_platdata(&pdev->dev);
> + if (!st_data || !st_data->base)
> + return -EINVAL;
> +
> + hws = kzalloc(sizeof(*hws) * ST_MAX_CLKS, GFP_KERNEL);
Fix the kbuild robot errors please.
> +
> + hws[ST_CLK_48M] = clk_hw_register_fixed_rate(NULL, "clk48MHz", NULL,
> 0,
> + 48000000);
> + hws[ST_CLK_25M] = clk_hw_register_fixed_rate(NULL, "clk25MHz", NULL,
> 0,
> + 25000000);
I'm not sure why we even keep these pointers around though. The driver
doesn't expose them as clks that clk_get() can find so they could just
be local variables and no heap allocation is needed.
> +
> + hws[ST_CLK_MUX] = clk_hw_register_mux(NULL, "oscout1_mux",
> + clk_oscout1_parents, ARRAY_SIZE(clk_oscout1_parents),
> + 0, st_data->base + CLKDRVSTR2, OSCOUT1CLK25MHZ, 3, 0, NULL);
> +
> + clk_set_parent(hws[ST_CLK_MUX]->clk, hws[ST_CLK_25M]->clk);
> +
> + hws[ST_CLK_GATE] = clk_hw_register_gate(NULL, "oscout1",
> "oscout1_mux",
> + 0, st_data->base + MISCCLKCNTL1, OSCCLKENB,
> + CLK_GATE_SET_TO_DISABLE, NULL);
> +
> + clk_hw_register_clkdev(hws[ST_CLK_GATE], "oscout1", NULL);
Could use devm_*() here in case you want to drop this stuff on driver
removal?
> +
> + return 0;
> +}
> +
> +static struct platform_driver st_clk_driver = {
> + .driver = {
> + .name = "clk-st",
> + },
> + .probe = st_clk_probe,
suppress attributes here to prevent unbinding from sysfs?
> +};
> +builtin_platform_driver(st_clk_driver);
