Hi Anson,
On Sat, May 5, 2018 at 5:29 AM, Anson Huang <anson.hu...@nxp.com> wrote:
> Add egalax touch screen support on i2c2 bus.
>
> Signed-off-by: Haibo Chen <haibo.c...@freescale.com>
Is Haibo the author of this patch? If so, his name should appear in
the From field.
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> ---
> changes since V5:
> improve pinctrl node name and touchscreen node name.
> arch/arm/boot/dts/imx6sx-sabreauto.dts | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 1dc5b58..3fe41d3 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -122,6 +122,12 @@
> };
>
> &iomuxc {
> + pinctrl_egalax_int: egalax-intgrp {
> + fsl,pins = <
> + MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x80000000
> + >;
> + };
> +
> pinctrl_enet1: enet1grp {
> fsl,pins = <
> MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
> @@ -264,6 +270,16 @@
> pinctrl-0 = <&pinctrl_i2c2>;
> status = "okay";
>
> + egalax_touchscreen@4 {
Should be touchscreen@4.
