Hi, Fabio Anson Huang Best Regards!
> -----Original Message----- > From: Fabio Estevam [mailto:[email protected]] > Sent: Saturday, May 5, 2018 7:56 PM > To: Anson Huang <[email protected]> > Cc: Shawn Guo <[email protected]>; Sascha Hauer > <[email protected]>; Fabio Estevam <[email protected]>; Rob > Herring <[email protected]>; Mark Rutland <[email protected]>; > Haibo Chen <[email protected]>; Andy Duan > <[email protected]>; A.s. Dong <[email protected]>; Robin Gong > <[email protected]>; dl-linux-imx <[email protected]>; moderated > list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE > <[email protected]>; open list:OPEN FIRMWARE AND > FLATTENED DEVICE TREE BINDINGS <[email protected]>; linux-kernel > <[email protected]> > Subject: Re: [PATCH V6 7/7] ARM: dts: imx6sx-sabreauto: add egalax touch > screen support > > Hi Anson, > > On Sat, May 5, 2018 at 5:29 AM, Anson Huang <[email protected]> > wrote: > > Add egalax touch screen support on i2c2 bus. > > > > Signed-off-by: Haibo Chen <[email protected]> > > Is Haibo the author of this patch? If so, his name should appear in the From > field. I made this patch based on NXP kernel tree, Haibo is the original author of this feature, but the original patch can NOT be applied directly, I have to refine the patch to meet the upstream requirement, so I added him as another signed-off tag, to avoid confuse, I can remove this sign-off in next patch version. Same story for other patches in this series. > > > Signed-off-by: Anson Huang <[email protected]> > > --- > > changes since V5: > > improve pinctrl node name and touchscreen node name. > > arch/arm/boot/dts/imx6sx-sabreauto.dts | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts > > b/arch/arm/boot/dts/imx6sx-sabreauto.dts > > index 1dc5b58..3fe41d3 100644 > > --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts > > +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts > > @@ -122,6 +122,12 @@ > > }; > > > > &iomuxc { > > + pinctrl_egalax_int: egalax-intgrp { > > + fsl,pins = < > > + MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 > 0x80000000 > > + >; > > + }; > > + > > pinctrl_enet1: enet1grp { > > fsl,pins = < > > MX6SX_PAD_ENET1_MDIO__ENET1_MDIO > 0xa0b1 > > @@ -264,6 +270,16 @@ > > pinctrl-0 = <&pinctrl_i2c2>; > > status = "okay"; > > > > + egalax_touchscreen@4 { > > Should be touchscreen@4. Will improve it in next patch version. Anson.
