Some RSCs may only have sleep and wake TCS, i.e, there is no dedicated
TCS for active mode request, but drivers may still want to make active
requests from these RSCs. In such cases re-purpose the wake TCS to send
active state requests.
The requirement for this is that the driver is aware that the wake TCS
is being repurposed to send active request, hence the sleep and wake
TCSes be invalidated before the active request is sent.
Signed-off-by: Lina Iyer <il...@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <m...@chromium.org>
---
drivers/soc/qcom/rpmh-rsc.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index 68c25ebbbe09..369b9b3eedc5 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -153,6 +153,7 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv
*drv,
const struct tcs_request *msg)
{
int type;
+ struct tcs_group *tcs;
switch (msg->state) {
case RPMH_ACTIVE_ONLY_STATE:
@@ -168,7 +169,22 @@ static struct tcs_group *get_tcs_for_msg(struct rsc_drv
*drv,
return ERR_PTR(-EINVAL);
}
- return get_tcs_of_type(drv, type);
+ /*
+ * If we are making an active request on a RSC that does not have a
+ * dedicated TCS for active state use, then re-purpose a wake TCS to
+ * send active votes.
+ * NOTE: The driver must be aware that this RSC does not have a
+ * dedicated AMC, and therefore would invalidate the sleep and wake
+ * TCSes before making an active state request.
+ */
+ tcs = get_tcs_of_type(drv, type);
+ if (msg->state == RPMH_ACTIVE_ONLY_STATE && IS_ERR(tcs)) {
+ tcs = get_tcs_of_type(drv, WAKE_TCS);
+ if (!IS_ERR(tcs))
+ rpmh_rsc_invalidate(drv);
+ }
+
+ return tcs;
}
static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
