Currently Exynos thermal driver treats as "active" all specified
trip points before reaching maximum number of hardware supported
trip points. Moreover polling-delay-passive is specified as "0"
in exynos7.dtsi (IOW passive polling is disabled). Therefore fix
type of cpu-alert-0 to cpu-alert6 trip points to be "active"
instead of "passive" (cpu-alert-7 type is "critical" so it
doesn't need a fixup).
Cc: Alim Akhtar <alim.akh...@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
Index: b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
===================================================================
--- a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi 2018-05-15
13:57:55.822172496 +0200
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi 2018-05-15
14:23:12.594016481 +0200
@@ -10,37 +10,37 @@ trips {
cpu-alert-0 {
temperature = <75000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-1 {
temperature = <80000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-2 {
temperature = <85000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-3 {
temperature = <90000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-4 {
temperature = <95000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-5 {
temperature = <100000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
- type = "passive";
+ type = "active";
};
cpu-crit-0 {
temperature = <115000>; /* millicelsius */
