On Tue, May 15, 2018 at 6:36 PM, Jerome Brunet <[email protected]> wrote:
> Allow the mpll driver to round the requested rate up if
> CLK_MESON_MPLL_ROUND_CLOSEST is set and it provides a rate closer to the
> requested rate.
>
> Signed-off-by: Jerome Brunet <[email protected]>
Acked-by: Martin Blumenstingl<[email protected]>
I gave it a quick spin on Odroid-C1 (which uses an RGMII Ethernet PHY
and the RGMII TX clock is supplied by MPLL2). the clock tree looks
fine and Ethernet is still working:
mpll2_div 1 1 0 249999701
0 0
mpll2 1 1 0 249999701
0 0
c9410000.ethernet#m250_sel 1 1 0
249999701 0 0
c9410000.ethernet#m250_div 1 1 0
249999701 0 0
c9410000.ethernet#fixed_div2 1 1
0 124999850 0 0
c9410000.ethernet#rgmii_tx_en 1 1
0 124999850 0 0
