Hi Atsushi, On Wed, 13 Jun 2007 00:43:16 +0900 (JST), Atsushi Nemoto wrote: > Use i2c_bit_add_numbered_bus() if device id specified, so that the > i2c-gpio adapter works well with new-style pre-declared devices. > > Signed-off-by: Atsushi Nemoto <[EMAIL PROTECTED]> > --- > diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c > index a7dd546..8a62c26 100644 > --- a/drivers/i2c/busses/i2c-gpio.c > +++ b/drivers/i2c/busses/i2c-gpio.c > @@ -142,7 +142,10 @@ static int __init i2c_gpio_probe(struct platform_device > *pdev) > adap->algo_data = bit_data; > adap->dev.parent = &pdev->dev; > > - ret = i2c_bit_add_bus(adap); > + if (pdev->id == -1) > + ret = i2c_bit_add_bus(adap); > + else > + ret = i2c_bit_add_numbered_bus(adap); > if (ret) > goto err_add_bus; >
This isn't sufficient. Before you call i2c_bit_add_numbered_bus(adap), you are supposed to set adap->nr to the desired i2c adapter number. -- Jean Delvare - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/