On Tue, May 29, 2018 at 12:04 PM, Clément Péron <peron.c...@gmail.com> wrote: > From: Clément Peron <clement.pe...@devialet.com> > > Add devicetree binding document for NXP's i.MX SoC specific > EPIT timer driver. > > Signed-off-by: Clément Peron <clement.pe...@devialet.com> > --- > .../devicetree/bindings/clock/imx6q,epit.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx6q,epit.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx6q,epit.txt > b/Documentation/devicetree/bindings/clock/imx6q,epit.txt > new file mode 100644 > index 000000000000..d54d455cebdc > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx6q,epit.txt > @@ -0,0 +1,25 @@ > +Binding for the i.MX6 EPIT timer > + > +This binding uses the common clock binding[1]. > + > +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > + > +Required properties: > +- compatible: should be "fsl,imx6q-epit" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- interrupts: Should contain EPIT controller interrupt > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names : as described in the clock bindings
Please list the name of each required clock here. I see that the driver does not request a "ckil" clock.