On Wed, 30 May 2018 17:18:55 +0800 Ian Kent <ra...@themaw.net> wrote:

> > I actually had an alternative approach that I tried out successfully
> > but discarded as being too different from the original code. Just for
> > reference, this one would work as well, and allow both to be
> > compiled together. The version you posted is probably better.
> 
> It's an attractive option but the problem is both implement the
> autofs file system.
> 
> I've always thought you can't register the same file system at the
> same time from two distinct sources.
> 
> If you're careful and compile each only as a module you could do it.
> 
> But many configurations have autofs compiled built-in because of the
> auto-loading problems that arose back when there was an autofs fs
> module as well as an autofs fs module present in the autofs4 directory.
> 
> Maybe it would actually work with one winning over the other but
> I'd prefer not to go that way.
> 
> It will be gone in two subsequent releases if it gets merged and no
> changes to the retained code will be needed with this approach.

I'm losing the plot here.  Can you please confirm that this is the
patch we want?


From: Ian Kent <ra...@themaw.net>
Subject: autofs: update fs/autofs4/Kconfig

Update Kconfig and add a depricated warning.

[ra...@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS]
  Link: 
http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.st...@pluto.themaw.net
Link: 
http://lkml.kernel.org/r/152626706133.28589.11994171621899212952.st...@pluto.themaw.net
Signed-off-by: Ian Kent <ra...@themaw.net>
Tested-by: Randy Dunlap <rdun...@infradead.org>
Cc: Al Viro <v...@zeniv.linux.org.uk>
Cc: Arnd Bergmann <a...@arndb.de>
Signed-off-by: Andrew Morton <a...@linux-foundation.org>
---

 fs/autofs4/Kconfig |   42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff -puN fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig fs/autofs4/Kconfig
--- a/fs/autofs4/Kconfig~autofs-update-fs-autofs4-kconfig
+++ a/fs/autofs4/Kconfig
@@ -1,5 +1,7 @@
 config AUTOFS4_FS
-       tristate "Kernel automounter version 4 support (also supports v3)"
+       tristate "Kernel automounter version 4 support (also supports v3 and 
v5)"
+       default n
+       depends on AUTOFS_FS = n
        help
          The automounter is a tool to automatically mount remote file systems
          on demand. This implementation is partially kernel-based to reduce
@@ -7,14 +9,32 @@ config AUTOFS4_FS
          automounter (amd), which is a pure user space daemon.
 
          To use the automounter you need the user-space tools from
-         <https://www.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-         want to answer Y to "NFS file system support", below.
+         <https://www.kernel.org/pub/linux/daemons/autofs/>; you also want
+         to answer Y to "NFS file system support", below.
 
-         To compile this support as a module, choose M here: the module will be
-         called autofs4.  You will need to add "alias autofs autofs4" to your
-         modules configuration file.
-
-         If you are not a part of a fairly large, distributed network or
-         don't have a laptop which needs to dynamically reconfigure to the
-         local network, you probably do not need an automounter, and can say
-         N here.
+         This module is in the process of being renamed from autofs4 to
+         autofs. Since autofs is now the only module that provides the
+         autofs file system the module is not version 4 specific.
+
+         The autofs4 module is now built from the source located in
+         fs/autofs. The autofs4 directory and its configuration entry
+         will be removed two kernel versions from the inclusion of this
+         change.
+
+         Changes that will need to be made should be limited to:
+         - source include statments should be changed from autofs_fs4.h to
+           autofs_fs.h since these two header files have been merged.
+         - user space scripts that manually load autofs4.ko should be
+           changed to load autofs.ko. But since the module directory name
+           and the module name are the same as the file system name there
+           is no need to manually load module.
+         - any "alias autofs autofs4" will need to be removed.
+
+         Please configure AUTOFS_FS instead of AUTOFS4_FS from now on.
+
+         NOTE: Since the modules autofs and autofs4 use the same file system
+               type name of "autofs" only one can be built. The "depends"
+               above will result in AUTOFS4_FS not appearing in .config for
+               any setting of AUTOFS_FS other than n and AUTOFS4_FS will
+               appear under the AUTOFS_FS entry otherwise which is intended
+               to draw attention to the module rename change.
_

Reply via email to