From: Kan Liang <kan.li...@linux.intel.com> LBR has a limited stack size. If a task has a deeper call stack than LBR's stack size, only the overflowed part is reported. A complete call stack may not be reconstructed by perf tool.
Current code doesn't access all LBR registers. It only read the ones below the TOS. The LBR registers above the TOS will be discarded unconditionally. When a CALL is captured, the TOS is incremented by 1 , modulo max LBR stack size. The LBR HW only records the call stack information to the register which the TOS points to. It will not touch other LBR registers. So the registers above the TOS probably still store the valid call stack information for an overflowed call stack, which need to be reported. To retrieve complete call stack information, we need to start from TOS, read all LBR registers until an invalid entry is detected. 0s can be used to detect the invalid entry, because - When a RET is captured, the HW zeros the LBR register which TOS points to, then decreases the TOS. - The LBR registers are reset to 0 when adding a new LBR event or scheduling an existing LBR event. - A taken branch at IP 0 is not expected The context switch code is also modified to save/restore all valid LBR registers. Furthermore, the LBR registers, which don't have valid call stack information, need to be reset in restore, because they may be polluted while swapped out. Here is a small test program, tchain_deep. Its call stack is deeper than 32. noinline void f33(void) { int i; for (i = 0; i < 10000000;) { if(i%2) i++; else i++; } } noinline void f32(void) { f33(); } noinline void f31(void) { f32(); } ... ... noinline void f1(void) { f2(); } int main() { f1(); } Here is the test result on SKX. The max stack size of SKX is 32. Without the patch: $perf record -e cycles --call-graph lbr -- ./tchain_deep $perf report --stdio # # Children Self Command Shared Object Symbol # ........ ........ ........... ................ ................. # 100.00% 99.99% tchain_deep tchain_deep [.] f33 | --99.99%--f30 f31 f32 f33 With the patch: $perf record -e cycles --call-graph lbr -- ./tchain_deep $perf report --stdio # Children Self Command Shared Object Symbol # ........ ........ ........... ................ .................. # 99.99% 0.00% tchain_deep tchain_deep [.] f1 | ---f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f16 f17 f18 f19 f20 f21 f22 f23 f24 f25 f26 f27 f28 f29 f30 f31 f32 f33 Signed-off-by: Kan Liang <kan.li...@linux.intel.com> --- arch/x86/events/intel/lbr.c | 32 ++++++++++++++++++++++++++------ arch/x86/events/perf_event.h | 1 + 2 files changed, 27 insertions(+), 6 deletions(-) diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c index cf372b9..a417004 100644 --- a/arch/x86/events/intel/lbr.c +++ b/arch/x86/events/intel/lbr.c @@ -346,7 +346,7 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx) mask = x86_pmu.lbr_nr - 1; tos = task_ctx->tos; - for (i = 0; i < tos; i++) { + for (i = 0; i < task_ctx->valid_lbrs; i++) { lbr_idx = (tos - i) & mask; wrlbr_from(lbr_idx, task_ctx->lbr_from[i]); wrlbr_to (lbr_idx, task_ctx->lbr_to[i]); @@ -354,6 +354,15 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx) if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO) wrmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]); } + + for (; i < x86_pmu.lbr_nr; i++) { + lbr_idx = (tos - i) & mask; + wrlbr_from(lbr_idx, 0); + wrlbr_to(lbr_idx, 0); + if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO) + wrmsrl(MSR_LBR_INFO_0 + lbr_idx, 0); + } + wrmsrl(x86_pmu.lbr_tos, tos); task_ctx->lbr_stack_state = LBR_NONE; } @@ -361,7 +370,7 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx) static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx) { unsigned lbr_idx, mask; - u64 tos; + u64 tos, from; int i; if (task_ctx->lbr_callstack_users == 0) { @@ -371,13 +380,17 @@ static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx) mask = x86_pmu.lbr_nr - 1; tos = intel_pmu_lbr_tos(); - for (i = 0; i < tos; i++) { + for (i = 0; i < x86_pmu.lbr_nr; i++) { lbr_idx = (tos - i) & mask; - task_ctx->lbr_from[i] = rdlbr_from(lbr_idx); + from = rdlbr_from(lbr_idx); + if (!from) + break; + task_ctx->lbr_from[i] = from; task_ctx->lbr_to[i] = rdlbr_to(lbr_idx); if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO) rdmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]); } + task_ctx->valid_lbrs = i; task_ctx->tos = tos; task_ctx->lbr_stack_state = LBR_VALID; } @@ -531,7 +544,7 @@ static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc) */ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) { - bool need_info = false; + bool need_info = false, call_stack = false; unsigned long mask = x86_pmu.lbr_nr - 1; int lbr_format = x86_pmu.intel_cap.lbr_format; u64 tos = intel_pmu_lbr_tos(); @@ -542,7 +555,7 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) if (cpuc->lbr_sel) { need_info = !(cpuc->lbr_sel->config & LBR_NO_INFO); if (cpuc->lbr_sel->config & LBR_CALL_STACK) - num = tos; + call_stack = true; } for (i = 0; i < num; i++) { @@ -555,6 +568,13 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc) from = rdlbr_from(lbr_idx); to = rdlbr_to(lbr_idx); + /* + * Read LBR call stack entries + * until invalid entry (0s) is detected. + */ + if (call_stack && !from) + break; + if (lbr_format == LBR_FORMAT_INFO && need_info) { u64 info; diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h index 9f37114..6b72a92 100644 --- a/arch/x86/events/perf_event.h +++ b/arch/x86/events/perf_event.h @@ -648,6 +648,7 @@ struct x86_perf_task_context { u64 lbr_to[MAX_LBR_ENTRIES]; u64 lbr_info[MAX_LBR_ENTRIES]; int tos; + int valid_lbrs; int lbr_callstack_users; int lbr_stack_state; }; -- 2.7.4