The following patches add arm pl353 static memory controller driver and NAND driver for Xilinx Zynq SoC. The arm pl353 smc supports two interfaces i.e nand and NOR/SRAM memory interfaces. The current implementation supports only a single SMC instance and nand specific configuration.
Xilinx Zynq TRM link: http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf ARM pl353 smc TRM link: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/DDI0380G_smc_pl350_series_r2p1_trm.pdf Tested Micron MT29F2G08ABAEAWP (On-die capable) and AMD/Spansion S34ML01G1. This latest series make use of ->exec_op(). Referenced the marvel driver as pointed by Miquel. Naga Sureshkumar Relli (4): Devicetree: Add pl353 smc controller devicetree binding information memory: pl353: Add driver for arm pl353 static memory controller Documentation: nand: pl353: Add documentation for controller and driver mtd: rawnand: pl353: Add basic driver for arm pl353 smc nand interface .../bindings/memory-controllers/pl353-smc.txt | 41 + Documentation/mtd/nand/pl353-nand.txt | 99 ++ drivers/memory/Kconfig | 9 + drivers/memory/Makefile | 1 + drivers/memory/pl353-smc.c | 466 +++++++ drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/pl353_nand.c | 1309 ++++++++++++++++++++ include/linux/pl353-smc.h | 31 + 9 files changed, 1964 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt create mode 100644 Documentation/mtd/nand/pl353-nand.txt create mode 100644 drivers/memory/pl353-smc.c create mode 100644 drivers/mtd/nand/raw/pl353_nand.c create mode 100644 include/linux/pl353-smc.h -- 2.7.4
