"keybrd_dataout" GPIO pin used to be initialized by ams-delta-serio driver to a state safe for ams-delta-serio device function and not changed thereafter. As such, it may be assumed not under the driver control and responsibility for its initialization handed over to board init file.
Introduce a GPIO hog table and take over control of the "keybrd_dataout" GPIO pin from the ams-delta-serio driver. Signed-off-by: Janusz Krzysztofik <[email protected]> --- Changelog: v2: rebased on v4.18-rc1, no conflicts arch/arm/mach-omap1/board-ams-delta.c | 8 ++++++++ drivers/input/serio/ams_delta_serio.c | 5 ----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 706eb2f9301d..2821284aa0c9 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -574,6 +574,12 @@ static struct gpiod_lookup_table *late_gpio_tables[] __initdata = { &ams_delta_nand_gpio_table, }; +static struct gpiod_hog ams_delta_gpio_hogs[] = { + GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), + {}, +}; + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -594,6 +600,8 @@ static void __init ams_delta_init(void) omap_cfg_reg(J19_1610_CAM_D6); omap_cfg_reg(J18_1610_CAM_D7); + gpiod_add_hogs(ams_delta_gpio_hogs); + omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 854d0d3ada52..b955c6a72e99 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -121,11 +121,6 @@ static const struct gpio ams_delta_gpios[] __initconst_or_module = { .flags = GPIOF_DIR_IN, .label = "serio-clock", }, - { - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT, - .flags = GPIOF_OUT_INIT_LOW, - .label = "serio-dataout", - }, }; static int ams_delta_serio_init(struct platform_device *pdev) -- 2.16.4
