Gentle Ping... Anson Huang Best Regards!
> -----Original Message----- > From: Anson Huang > Sent: Sunday, June 3, 2018 9:44 AM > To: shawn...@kernel.org; ker...@pengutronix.de; Fabio Estevam > <fabio.este...@nxp.com>; robh...@kernel.org; mark.rutl...@arm.com; > mturque...@baylibre.com; sb...@kernel.org; > mich...@amarulasolutions.com; matteo.l...@engicam.com > Cc: dl-linux-imx <linux-...@nxp.com>; linux-arm-ker...@lists.infradead.org; > devicet...@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-...@vger.kernel.org > Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks > > i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver > to make sure all GPIO banks work as expected. > > Signed-off-by: Anson Huang <anson.hu...@nxp.com> > --- > no changes since V1. > arch/arm/boot/dts/imx6ul.dtsi | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi > index 1241972..405e068 100644 > --- a/arch/arm/boot/dts/imx6ul.dtsi > +++ b/arch/arm/boot/dts/imx6ul.dtsi > @@ -437,6 +437,7 @@ > reg = <0x0209c000 0x4000>; > interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_GPIO1>; > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > @@ -450,6 +451,7 @@ > reg = <0x020a0000 0x4000>; > interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_GPIO2>; > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > @@ -462,6 +464,7 @@ > reg = <0x020a4000 0x4000>; > interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_GPIO3>; > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > @@ -474,6 +477,7 @@ > reg = <0x020a8000 0x4000>; > interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_GPIO4>; > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > @@ -486,6 +490,7 @@ > reg = <0x020ac000 0x4000>; > interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6UL_CLK_GPIO5>; > gpio-controller; > #gpio-cells = <2>; > interrupt-controller; > -- > 2.7.4
