On 06/22/2018 10:58 AM, Richard Weinberger wrote:
> Masahiro,
>
> Am Freitag, 22. Juni 2018, 16:37:21 CEST schrieb Masahiro Yamada:
>> Hi Richard,
>>
>>
>> 2018-06-19 21:07 GMT+09:00 Richard Weinberger <rich...@nod.at>:
>>> The denali NAND flash controller needs at least two clocks to operate,
>>> nand_clk and nand_x_clk.
>>> Since 1bb88666775e ("mtd: nand: denali: handle timing parameters by
>>> setup_data_interface()") nand_x_clk is used to derive timing settings.
>>>
>>> Signed-off-by: Richard Weinberger <rich...@nod.at>
>>> ---
>>> Strictly speaking denali needs a ecc_clk too, but AFAIK such a clock
>>> is not present on this SoC.
>>> But my SoCFPGA knowledge is very limited.
>>>
>>> Thanks,
>>> //richard
>>> ---
>>> arch/arm/boot/dts/socfpga.dtsi | 3 ++-
>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
>>> index 486d4e7433ed..562f7b375bbd 100644
>>> --- a/arch/arm/boot/dts/socfpga.dtsi
>>> +++ b/arch/arm/boot/dts/socfpga.dtsi
>>> @@ -754,7 +754,8 @@
>>> reg-names = "nand_data", "denali_reg";
>>> interrupts = <0x0 0x90 0x4>;
>>> dma-mask = <0xffffffff>;
>>> - clocks = <&nand_clk>;
>>> + clocks = <&nand_clk>, <&nand_x_clk>;
>>> + clock-names = "nand", "nand_x";
>>
>>
>> IMHO, this should be
>>
>> clocks = <&nand_clk>, <&nand_x_clk>, <&nand_x_clk>;
>> clock-names = "nand", "nand_x", "ecc";
No, it should be just the nand_x and ecc.
There's already a patch to use the nand_x_clk and not the nand_clk.
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/commit/?h=socfpga_for_next_v4.19_fixes_v1&id=1709ab58eb79b19bceb2287d111bf1bd2df1cf6d
Dinh
