[PATCH 01/15] MIPS: dts: img: pistachio_marduk: Reorder nodes

[Andreas Färber]

Consistently order nodes referenced by label alphabetically.
No functional changes. This prepares for adding nodes.

Signed-off-by: Andreas Färber <afaer...@suse.de>
---
 arch/mips/boot/dts/img/pistachio_marduk.dts | 76 ++++++++++++++---------------
 1 file changed, 38 insertions(+), 38 deletions(-)

diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts 
b/arch/mips/boot/dts/img/pistachio_marduk.dts
index cf9cebd52294..f03f4114e645 100644
--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -74,40 +74,34 @@
        };
 };
 
-&internal_dac {
-       VDD-supply = <&internal_dac_supply>;
-};
-
-&spfi1 {
+&adc {
        status = "okay";
-
-       pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
-                   <&spim1_cs1_pin>;
-       pinctrl-names = "default";
-       cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
-
-       flash@0 {
-               compatible = "spansion,s25fl016k", "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <50000000>;
-       };
+       vref-supply = <&reg_1v8>;
+       adc-reserved-channels = <0x10>;
 };
 
-&uart0 {
+&enet {
        status = "okay";
-       assigned-clock-rates = <114278400>, <1843200>;
 };
 
-&uart1 {
+&i2c2 {
        status = "okay";
+       clock-frequency = <400000>;
+
+       tpm@20 {
+               compatible = "infineon,slb9645tt";
+               reg = <0x20>;
+       };
+
 };
 
-&usb {
+&i2c3 {
        status = "okay";
+       clock-frequency = <400000>;
 };
 
-&enet {
-       status = "okay";
+&internal_dac {
+       VDD-supply = <&internal_dac_supply>;
 };
 
 &pin_enet {
@@ -118,12 +112,6 @@
        drive-strength = <2>;
 };
 
-&sdhost {
-       status = "okay";
-       bus-width = <4>;
-       disable-wp;
-};
-
 &pin_sdhost_cmd {
        drive-strength = <2>;
 };
@@ -140,24 +128,36 @@
        pinctrl-names = "default";
 };
 
-&adc {
+&sdhost {
        status = "okay";
-       vref-supply = <&reg_1v8>;
-       adc-reserved-channels = <0x10>;
+       bus-width = <4>;
+       disable-wp;
 };
 
-&i2c2 {
+&spfi1 {
        status = "okay";
-       clock-frequency = <400000>;
 
-       tpm@20 {
-               compatible = "infineon,slb9645tt";
-               reg = <0x20>;
+       pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+                   <&spim1_cs1_pin>;
+       pinctrl-names = "default";
+       cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+       flash@0 {
+               compatible = "spansion,s25fl016k", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
        };
+};
 
+&uart0 {
+       status = "okay";
+       assigned-clock-rates = <114278400>, <1843200>;
 };
 
-&i2c3 {
+&uart1 {
+       status = "okay";
+};
+
+&usb {
        status = "okay";
-       clock-frequency = <400000>;
 };
-- 
2.16.4