[PATCH 05/15] MIPS: dts: img: pistachio_marduk: Enable SPIM0

[Andreas Färber]

SPIM0 supplies SPI pins on the mikroBUS and Raspberry Pi B+ connectors.

Signed-off-by: Andreas Färber <afaer...@suse.de>
---
 arch/mips/boot/dts/img/pistachio_marduk.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts 
b/arch/mips/boot/dts/img/pistachio_marduk.dts
index 5557a6ad61c3..d723b68084c9 100644
--- a/arch/mips/boot/dts/img/pistachio_marduk.dts
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -123,6 +123,14 @@
        pins = "mfio17", "mfio18", "mfio19", "mfio20";
 };
 
+&pin_spim0 {
+       drive-strength = <2>;
+};
+
+&pin_spim0_clk {
+       drive-strength = <2>;
+};
+
 &pwm {
        status = "okay";
 
@@ -137,6 +145,21 @@
        disable-wp;
 };
 
+&spfi0 {
+       status = "okay";
+
+       pinctrl-0 = <&spim0_pins>,
+                   <&spim0_cs0_alt_pin>,
+                   <&spim0_cs2_alt_pin>,
+                   <&spim0_cs3_alt_pin>,
+                   <&spim0_cs4_alt_pin>;
+       pinctrl-names = "default";
+       cs-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>, <0>,
+                  <&gpio1 12 GPIO_ACTIVE_HIGH>,
+                  <&gpio1 13 GPIO_ACTIVE_HIGH>,
+                  <&gpio1 14 GPIO_ACTIVE_HIGH>;
+};
+
 &spfi1 {
        status = "okay";
 
-- 
2.16.4