On Wed, 25 Jul 2018 04:53:18 +0900 Minwoo Im <minwoo.im....@gmail.com> wrote:
> Hi Alex, > > On Tue, 2018-07-24 at 10:14 -0600, Alex Williamson wrote: > > The Samsung SM961/PM961 (960 EVO) sometimes fails to return from FLR > > with the PCI config space reading back as -1. A reproducible instance > > of this behavior is resolved by clearing the enable bit in the NVMe > > configuration register and waiting for the ready status to clear > > (disabling the NVMe controller) prior to FLR. > > > > Signed-off-by: Alex Williamson <alex.william...@redhat.com> > > --- > > drivers/pci/quirks.c | 83 > > ++++++++++++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 83 insertions(+) > > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > > index e72c8742aafa..3899cdd2514b 100644 > > --- a/drivers/pci/quirks.c > > +++ b/drivers/pci/quirks.c > > @@ -28,6 +28,7 @@ > > #include <linux/platform_data/x86/apple.h> > > #include <linux/pm_runtime.h> > > #include <linux/switchtec.h> > > +#include <linux/nvme.h> > > #include <asm/dma.h> /* isa_dma_bridge_buggy */ > > #include "pci.h" > > > > @@ -3669,6 +3670,87 @@ static int reset_chelsio_generic_dev(struct pci_dev > > *dev, int probe) > > #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 > > #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 > > > > +/* > > + * The Samsung SM961/PM961 controller can sometimes enter a fatal state > > after > > + * FLR where config space reads from the device return -1. We seem to be > > + * able to avoid this condition if we disable the NVMe controller prior to > > + * FLR. This quirk is generic for any NVMe class device requiring similar > > + * assistance to quiesce the device prior to FLR. > > + * > > + * NVMe specification: https://nvmexpress.org/resources/specifications/ > > + * Revision 1.0e: > > It seems too old version of NVMe specification. Do you have any special > reason > to comment the specified 1.0 version instead of 1.3 or something newer? I wanted to show that I'm using NVMe features that have been available since the initial release and there's no reason to check the version field for their support. > > + * Chapter 2: Required and optional PCI config registers > > + * Chapter 3: NVMe control registers > > + * Chapter 7.3: Reset behavior > > + */ > > +static int nvme_disable_and_flr(struct pci_dev *dev, int probe) > > The name of this function seems able to be started with 'reset_' prefix just > like other quirks for reset. > What about reset_samsung_pm961 or something? I'm fine with any generic prefix, but I'm not fine with obfuscating the purpose of the function behind a vendor/device specific name. If someone else comes along needing this same functionality, they'll probably be reluctant to even look at what a "reset_samsung_sm961" function does. If they do, they might still be reluctant to reuse something so obviously made for a specific device. I thought this was pretty descriptive of what it's doing. Prefixing with 'reset_' is a tad redundant. > > +{ > > + void __iomem *bar; > > + u16 cmd; > > + u32 cfg; > > + > > + if (dev->class != PCI_CLASS_STORAGE_EXPRESS || > > + !pcie_has_flr(dev) || !pci_resource_start(dev, 0)) > > + return -ENOTTY; > > + > > + if (probe) > > + return 0; > > + > > + bar = pci_iomap(dev, 0, NVME_REG_CC + sizeof(cfg)); > > + if (!bar) > > + return -ENOTTY; > > + > > + pci_read_config_word(dev, PCI_COMMAND, &cmd); > > + pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY); > > + > > + cfg = readl(bar + NVME_REG_CC); > > + > > + /* Disable controller if enabled */ > > + if (cfg & NVME_CC_ENABLE) { > > + u64 cap = readq(bar + NVME_REG_CAP); > > + unsigned long timeout; > > + > > + /* > > + * Per nvme_disable_ctrl() skip shutdown notification as it > > + * could complete commands to the admin queue. We only > > intend > > + * to quiesce the device before reset. > > + */ > > + cfg &= ~(NVME_CC_SHN_MASK | NVME_CC_ENABLE); > > + > > + writel(cfg, bar + NVME_REG_CC); > > + > > + /* > > + * Some controllers require an additional delay here, see > > + * NVME_QUIRK_DELAY_BEFORE_CHK_RDY. None of those are yet > > + * supported by this quirk. > > + */ > > + > > + /* Cap register provides max timeout in 500ms increments */ > > + timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies; > > + > > + for (;;) { > > + u32 status = readl(bar + NVME_REG_CSTS); > > + > > + /* Ready status becomes zero on disable complete */ > > + if (!(status & NVME_CSTS_RDY)) > > + break; > > + > > + msleep(100); > > + > > + if (time_after(jiffies, timeout)) { > > + pci_warn(dev, "Timeout waiting for NVMe ready > > status to clear after disable\n"); > > + break; > > + } > > + } > > + } > > + > > + pci_iounmap(dev, bar); > > + > > + pcie_flr(dev); > > + > > + return 0; > > +} > > + > > static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { > > { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, > > reset_intel_82599_sfp_virtfn }, > > @@ -3676,6 +3758,7 @@ static const struct pci_dev_reset_methods > > pci_dev_reset_methods[] = { > > reset_ivb_igd }, > > { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, > > reset_ivb_igd }, > > + { PCI_VENDOR_ID_SAMSUNG, 0xa804, nvme_disable_and_flr }, > > Why don't we just define a macro just like other DEVICE_IDs. (e.g. > PCIE_DEVICE_ID_INTEL_82599_SFP_VF). > > #define PCI_DEVICE_ID_SAMSUNG_PM961 0xa804 include/linux/pci_ids.h" /* * PCI Class, Vendor and Device IDs * * Please keep sorted. * * Do not add new entries to this file unless the definitions * are shared between multiple drivers. */ Those other devices are relatively old, they were probably #define'd before we started the policy in the header. Thanks, Alex > > { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, > > reset_chelsio_generic_dev }, > > { 0 } > > > > > > _______________________________________________ > > Linux-nvme mailing list > > linux-n...@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-nvme