Hi all, Today's linux-next merge of the staging tree got a conflict in:
Documentation/devicetree/bindings/iio/pressure/bmp085.txt
between commit:
791d3ef2e111 ("dt-bindings: remove 'interrupt-parent' from bindings")
from the devicetree tree and commit:
d2b863baf1c7 ("iio: pressure: bmp280: remove unused options from device tree
documentation")
from the staging tree.
I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging. You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.
--
Cheers,
Stephen Rothwell
diff --cc Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index 5498b0688b6f,abcab02504fb..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@@ -8,10 -8,7 +8,6 @@@ Required properties
"bosch,bme280"
Optional properties:
- - chip-id: configurable chip id for non-default chip revisions
- - temp-measurement-period: temperature measurement period (milliseconds)
- - default-oversampling: default oversampling value to be used at startup,
- value range is 0-3 with rising sensitivity.
-- interrupt-parent: should be the phandle for the interrupt controller
- interrupts: interrupt mapping for IRQ
- reset-gpios: a GPIO line handling reset of the sensor: as the line is
active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
pgpKszTAMrJGB.pgp
Description: OpenPGP digital signature
