[PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity

[Brian Masney]

This patch adds device tree bindings for the tsl2772 ALS / proximity
sensor for the LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masn...@onstation.org>
Signed-off-by: Jonathan Marek <jonat...@marek.ca>
---
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 27 +++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi           | 11 ++++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts 
b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 928affae1885..ed8f064d0895 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -242,6 +242,15 @@
                        };
                };
 
+               i2c3_pins: i2c3 {
+                       mux {
+                               pins = "gpio10", "gpio11";
+                               function = "blsp_i2c3";
+                               drive-strength = <2>;
+                               bias-disable;
+                       };
+               };
+
                i2c12_pins: i2c12 {
                        mux {
                                pins = "gpio87", "gpio88";
@@ -333,6 +342,24 @@
                        };
                };
        };
+
+       i2c@f9925000 {
+               status = "ok";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c3_pins>;
+               clock-frequency = <100000>;
+               qcom,src-freq = <50000000>;
+
+               avago_apds993@39 {
+                       compatible = "avago,apds9930";
+                       reg = <0x39>;
+                       interrupts-extended = <&msmgpio 61 
IRQ_TYPE_EDGE_FALLING>;
+                       vdd-supply = <&pm8941_l17>;
+                       vddio-supply = <&pm8941_lvs1>;
+                       led-max-microamp = <100000>;
+                       amstaos,proximity-diodes = <0>;
+               };
+       };
 };
 
 &spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi 
b/arch/arm/boot/dts/qcom-msm8974.dtsi
index cebb6ae9143a..6dcf2bee66fb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -713,6 +713,17 @@
                        #size-cells = <0>;
                };
 
+               blsp_i2c3: i2c@f9925000 {
+                       status = "disabled";
+                       compatible = "qcom,i2c-qup-v2.1.1";
+                       reg = <0xf9925000 0x1000>;
+                       interrupts = <0 97 IRQ_TYPE_NONE>;
+                       clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc 
GCC_BLSP1_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
                blsp_i2c8: i2c@f9964000 {
                        status = "disabled";
                        compatible = "qcom,i2c-qup-v2.1.1";
-- 
2.17.1